Software - Lyngdorf Audio TDA 2200 Owner's Manual

Normally the selection of presets can be entered and will be used from the remote control
directly or from the PC interface. But if the remote is not at hand the presets can be
changed from the front menu as well.
ADC(Analog to Digital Converter) level setup is used for setting the sensitivity of the ADC
per Input. In normal mode the full scale input sensitivity for a balanced input is 4.4Vrms, in
High mode the sensitivity is +6dB so the full scale input is 2.2Vrms.

Software

Lyngdorf Audio supplies free DSP setup software which can access all Parameters for
Signal processing. The Software and its use is explained in details in the DSP Software
manual, and at all times the latest revision of the software and the manual can be
downloaded from www.Lyngdorf.com
The TDA 2200 firmware can be upgraded using the 'Lyngdorf Serial Load, software
upgrade tool' this is in the PC package available from www.Lyngdorf.com and on your
enclosed CD. Follow the upgrade steps to bring the product into upgrade mode.
ADC Input: 1
Level High
Fig 3: Software Upgrade Tool.
- 17 -