Software - Lyngdorf Audio SDAI 2175 Owner's Manual

Fig. 3 Illustrating the menu system can be read from left to right, starting in normal mode
which can be changed into Menu active mode by pressing the menu key, indicated with
<Menu>.
The Different Menu's are:
Sub Menu Parameter
RELVOL +/-6 dB
(0.1dB step)
SENSIT 0/6 dB
BRIGHT 0..4
IR RMT On/Off
INPTXT "........"
LNKID 0..255
LNKSP 96/576
BAL LR +/-6 dB
(0.1dB step)
DEFVOL 0..99.9 dB
MAXVOL 0..99.9 dB

Software

Lyngdorf Audio supplies control software for remote control of the SDAI 2175 and setup of
the Input text system. Please check the Lyngdorf audio web site for download of the
newest version at http://www.Lyngdorf.com
The SDAI 2175 firmware can be upgraded using the 'Lyngdorf Serial Load, software
upgrade tool' this is in the PC package available from www.Lyngdorf.com
Follow the upgrade steps to bring the product into boot mode. Only one device should be
connected to the PC when upgrading the firmware.
Description
Relative volume for the active input. Fine tuning of the volume
control for each input relative to the global setting
Input amplifier sensitivity 0 or +6 dB for the active input. Used for
increasing the sensitivity for weak sources in the preamplifier
section without increasing noise level.
Brightness of Display from 0 (Display off) to max intensity 4
Enable / Disable of remote control, Remote can be disabled if the
SDAI 2175 is controlled over RS232 interface.
Selection of input text for the active input. Selection can be chosen
between a range of predefined strings or from 7 user defined strings
which can be entered with the Lyngdorf SDAI 2175 Control software
Link ID adress in the Lyngdorf network. Address 0 is reserved,
address 1 is used for masters in the network, so applicable
addresses are from 2 and up.
Link Communication speed 9600/57600 Baud. Normal Lyngdorf
interconnect speed is 57600 Baud
Balance of level from Left to Right speaker
Default volume when the amplifier comes out of standby
Maximum volume the user can select, used as a safety feature to
prevent excessive volume levels
- 12 -