Remote Control - Lyngdorf Audio TDA 2200 Owner's Manual

Remote Control

The remote control is used to access the menu system and replicate the buttons directly
accessible on the front panel. The buttons are described in the following:
• Standby – The standby button toggles the TDA 2200 between active and standby
mode
• Digital – Changes to Digital input, or if already selected, cycles to the next Digital
input.
• Analog – Changes to Analog input, or if already selected, cycles to the next Analog
input.
• Correction 1-9 – Preset 1-7 can be selected with buttons 1-7, default presets are all
linear bypass, and preset selection of the active preset will only affect the sound
after changing the preset contents with the DSP software
• Correction Bypass – Bypasses the selected preset to a linear bypass.
• Menu – activates or deactivates the Menu system on the Main display
• Video – No function
• UP/DOWN/LEFT/RIGHT – Navigation in menus or selection of input.
• Enter – Selection in menu system
• Volume Up/down – changes volume in the chosen direction
• Mute – Toggles Mute function on/off
- 14 -