Remote Control
The remote control is used to access the menu system as well as the buttons directly accessible on the
front panel. To control the DPA-1 the AMP key must be pressed (please note the DPA-1's volume and
mute buttons still work when in other modes).
The functionality of the buttons when AMP is pressed are as follows:
1.
Standby
The standby button puts the DPA-1 in stand-by mode.
2.
Numerical Buttons 1-8
Selects Focus listening mode (up to 8 different listening positions can
be stored in RoomPerfect™).
3.
Numerical Button 9
Selects global listening mode.
4.
Digital
Turns On the DPA-1 from stand-by mode in the last selected digital
input.
Selects Digital input, or if already selected, cycles to the next Digital
input. To select a specifi c Digital input, press the 'Digital' button fol-
lowed by numerical button 1-5 within 2 seconds.
5.
Numerical Button 0
Selects bypass listening mode (no room correction fi lter selected).
6.
Info
Hold down for 2 seconds to show the current samplerate.
To select a specifi c Voicing fi lter, press the 'Info' followed by numerical
button 0-6 within 2 seconds.
7.
Analog
Turns On the DPA-1 from stand-by mode with the last selected analog
input.
Selects Analog input, or if already selected, cycles to the next Analog
input. To select a specifi c Analog input, press the 'Analog' button fol-
lowed by numerical button 1-4 within 2 seconds.
8.
Mute
Toggles Mute function on/off.
9.
Menu
Activates or de-activates the Menu system on the Main display.
10. AMP
Selects the remote for operation with a Lyngdorf Amplifi er/Pre-amp.
11. RCS
Selects the remote for operation with a Lyngdorf Room Processor.
12. CD
Selects the remote for operation with a Lyngdorf CD Player.
10
1
1
2
3
2
4
5
6
7
8
9
4
0
info
digital
5
7
menu
analog
8
10
RCS
CD
AMP
TUNER
11
14
channel
volume
16
ENTER
17
18
A/B
repeat
random
3
6
9
12
13
15