Menu Tree
RELVOL
Relative Volume
LNKID
Link Address
Link Comm. Speed
Fig. 1.
RELVOL - Relative Volume
Relative volume for the active input. Fine tuning of the volume control for each input relative to the
global setting. The Sensitivity can be adjusted +/-6dB in 0.1 dB steps.
SENSIT - Sensitivity
Input amplifi er sensitivity 0 or +6 dB for the active input. Used for increasing the sensitivity for weak
sources in the preamplifi er section without increasing noise level.
BRIGHT - Brightness
Brightness of Display from 0 (Display off) to max intensity 4.
IR RMT - IR Remote
Enable / Disable of remote control, Remote can be disabled if the SDAI 2175 is controlled over RS232
interface.
INPTXT - Select Input Text
Selection of input text for the active input. Selection can be chosen between a range of predefi ned
strings or from 7 user defi ned strings which can be entered with the Lyngdorf SDAI 2175 Control soft-
ware.
SDAI 2175 Main Menu
SENSIT
BRIGHT
Sensitivity
Brightness
LNKSP
BAL LR
Balance Left Right
RELVOL
Relative Volume
SENSIT
Sensitivity
BRIGHT
Brightness
IR RMT
IR Remote
INPTXT
Select Input Text
IR RMT
INPTXT
IR Remote
Select Input Text
DEFVOL
MAXVOL
Default Volume
Maximum Volume
11