MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the storage compartment and hanging it to one side
9.64
–
Switch off the ignition by turning the orange programming key to the position
–
Pull out the programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black ignition key to the position
FI Warning lamp
Immobilizer indicator lamp
again.
–
Switch off the ignition by turning the black ignition key to the position
–
Remove the black ignition key.
–
To activate further ignition keys, repeat the last 4 steps with the respective ignition
key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
number of flashes equals the number of functional black ignition keys includ-
ing the orange programming key.
–
Switch off the ignition by turning the orange programming key to the position
–
Pull out the programming key.
All black ignition keys are activated included in this job sequence are activated.
x
–
Remove the seat. (
p. 67)
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and lights up
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly and flashes; the
135
.
.
.
.
.