SERVICE WORK ON THE CHASSIS
Mounting the seat
10.11
1
0 0 1
2
0 0 2
Removing the storage compartment and hanging it to one side
10.12
–
Hook projection
0 0 3
3
and push it forward at the same time. The two projections
frame.
–
Push locking pin
locking pin locks in place with an audible click.
–
Finally, check that the seat is correctly mounted.
100505-10
–
Remove the seat. (
–
Open the storage compartment. (
–
Remove screws
–
Carefully remove the storage compartment and swing it to the right. Place a cloth
between the right fuel tank and the storage compartment to prevent damage.
100616-10
of the seat into the storage compartment, lower the seat at the rear
into the lock housing and push the back of the seat down until the
x
p. 82)
p. 38)
.
83
must be inserted into the