KTM 990 Adventure 2009 Owner's Manual page 135

MAINTENANCE WORK ON CHASSIS AND ENGINE
Loss of a black ignition key (second black ignition key available):
The following procedure deactivates all activated black ignition keys that are not
included in the procedure.
–
Turn the emergency OFF switch to the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
100607-10
–
Switch off the ignition by turning the orange programming key to the position
–
Pull out the programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black ignition key to the position
FI Warning lamp
Immobilizer indicator lamp
again.
–
Switch off the ignition by turning the black ignition key to the position
–
Remove the black ignition key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
number of flashes equals the number of functional black ignition keys includ-
ing the orange programming key. In this case, twice.
–
Switch off the ignition by turning the orange programming key to the position
–
Pull out the programming key.
The lost black ignition key is deactivated.
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and lights up
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly and flashes; the
133
.
.
.
.
.
.