Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the headlight mask with the headlight
9.53
–
Position side cover
–
Attach the overflow hose of the fuel tank to the connector.
–
Connect the plug-in connectors of the turn signal cables and swing the side cover up
toward the vehicle.
–
Mount and tighten screws
Guideline
Remaining chassis nuts
100589-11
–
Check the function of turn signal.
–
Switch off all power consumers and the engine.
–
Remove the front side cover. (
–
Unhook the headlight mask from the cockpit holder and remove it toward the front.
100590-10
at the fuel tank on the bottom and hold it at an angle.
with the washers.
M6
p. 123)
124
15 Nm
(11.1 lbf ft)
Advertisement
Table of Contents
