Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Loosen nut
–
Loosen nuts
–
Adjust the chain tension by turning the adjusting screws
Guideline
Chain tension
Turn adjusting screws
right chain adjuster
rear wheel is then correctly aligned.
Info
The upper chain section must be taut.
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten nuts
–
Make sure that chain adjusters
–
Tighten nut
Guideline
Nut, rear wheel spindle
100553-10
Info
Chain adjusters
.
.
on the left and right so that the markings on the left and
are in the same position in relation to reference marks
.
are resting against adjusting screws
.
M25x1.5
can be turned through 180°.
on the left and right.
35... 40 mm (1.38... 1.57 in)
.
90 Nm
Thread greased
(66.4 lbf ft)
83
. The
Advertisement
Table of Contents
