KTM 990 Adventure 2009 Owner's Manual page 136

MAINTENANCE WORK ON CHASSIS AND ENGINE
The existing black ignition key is reactivated.
Loss of both black ignition keys (no black ignition key available):
This procedure is important to prevent misuse of the lost black ignition key.
–
Turn the emergency OFF switch to the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the position
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
number of flashes equals the number of functional black ignition keys includ-
ing the orange programming key. In this case once, since all black ignition keys
are deactivated.
–
Switch off the ignition by turning the orange programming key to the position
–
Pull out the programming key.
All black ignition keys are deactivated.
–
Order a new black ignition key according to the key number on the KEYCODECARD
and activate it.
Activating the ignition key:
–
Turn the emergency OFF switch to the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the position
FI Warning lamp
Immobilizer indicator lamp
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly and flashes; the
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
134
.
.
.
.
.