Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
–
Raise the vehicle off of the center stand. (
–
Place the vehicle on the side stand.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Fully drain the engine oil out of the engine.
–
Remove screws
100626-10
–
Pull oil sieve
–
Remove the oil filter.
–
Clean all oil screens and oil drain plugs with a magnet.
–
Clean all sealing surfaces.
100627-10
–
Check seal ring
–
Insert oil sieve
–
Position the oil line. Mount and tighten the screws.
Guideline
Remaining chassis screws
–
Mount oil drain plug
100628-10
.
and move oil line
to one side.
out of the oil tank.
x
(
p. 158)
of the oil sieve for damage and correct seating.
into the oil tank.
with the magnet and new seal and tighten.
p. 67)
M6
10 Nm (7.4 lbf ft)
156
Advertisement
Table of Contents
