GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic setting of the clutch lever. (
–
Adjust the free travel of the handbrake lever. (
–
Adjust the basic position of the footbrake lever.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and
in a standing position to get a better feeling for the vehicle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.
Running in the engine
6.2
–
Do not exceed the specified engine speed and load during the running-in period.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi)
After the first: 1,000 km (621.4 mi)
–
Avoid full-throttle operation!
p. 151)
p. 88)
x
6,500 rpm
9,500 rpm
45