Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing the low beam bulb
9.56
Note
Damage to reflector Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease before
mounting.
–
Remove the headlight mask with the headlight. (
–
Remove rubber cap
100594-10
–
Detach spring bar
–
Position the new bulb in the headlight and attach the spring bar.
High beam (H3 / socket PK22s) (
Info
The bulb must be correctly seated at projections
–
Connect the plug-in connector and mount the rubber cap.
–
Install the headlight mask with the headlight. (
100595-10
and disconnect plug-in connector
and remove the bulb from the headlight.
p. 187)
p. 124)
.
.
p. 125)
126
Advertisement
Table of Contents
