Section 4: Operations; Operation Safety; Basic Controls - Grizzly G0652 Owner's Manual

SEcTION 4: OpERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and clothing
can get caught in machin-
ery and cause serious per-
sonal injury. Keep loose
clothing and long hair
away from machinery.
Keep the blade guard in
the down position at all
times. failure to do this
could result in serious
personal injury or death.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REc-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-30-

Basic controls

this section covers the basic controls used during
routine operations.
ON Button: starts motor.
Stop paddle/Off Button: stops motor when
pushed in.
Safety pin & chain: disable the saw and pre-
vent accidental startup by inserting the safety pin
through the holes in the on button, and insert the
end of the chain into the pin, as shown in figure
34.
safety pin
figure 34. switch disabled.
g0651/g0652 10" extreme series table saws
safety
pin
on
switch
stop
paddle