Table of Contents
Advertisement
assigned. When entering User Programming, the Area LEDs will
illuminate to show you which areas you have access to. When you
begin programming, the numerical LEDs 1 to 4 will illuminate and
correspond to areas assigned to LEDs A1 to A4 respectively.
Press Key ON/OFF
[1] ON (default)
[2] ON
[3] ON
[4] ON
All keys OFF
In Table 1 and Table 2 the User Code Option or Area is
considered "ON" when the corresponding numerical light is
illuminated. You turn the numerical lights "ON" and "OFF" by
pressing the numerical keys on your keypad. When the
area's number is "OFF", the User Access Code does not
have access to that protected area.
7.4 Erasing Access Codes
To delete existing Access Codes, press the [
and 7 in on page 18. Once the information is erased, press the
[
] key to save and exit.
ENTER
7.5 Keypad Lock-Out
If a consecutive number of invalid codes are entered on your keypad,
the installer can program the system to lock out access from the
keypad for a specified period of time.
22 User Manual
Table 2: Area Assignment
Access to Area 1
Access to Area 2
Access to Area 3
Access to Area 4
Controls PGMs only (if PGMs are
programmed by the installer).
Area Assignment
] key in steps 5, 6,
CLEAR
Advertisement
Table of Contents
