Table of Contents
Advertisement
5) Enter a [
NEW CODE
the code will illuminate one at a time as you enter the new code.
When you have entered the maximum number of digits, Your
keypad will emit a Confirmation Beep.
6) Press the [
7.2 User Access Codes
On a DGP-848 system, this keypad can support up to 96 User Access
Codes using two-digit code values (02 to 96). Code 01 is a System
Master Code.
You cannot program access control options with this keypad.
User Access Codes can be programmed with various options, which
will allow you to control the access to your system. Only the System
Master Code and codes with the Master feature can program User
Access Codes with their User Options and Area Assignment.
How do I program a user access code?
1) Enter your [
feature.
2) Press the [0] key to enter the User Programming Menu. The area
lights of areas assigned to your User Access Code and the P
action light will flash.
3) Press the [
your User Access Code and the A
illuminate. The P
18 User Manual
]. The numerical lights for the next numbers in
] key to save and exit.
ENTER
SYSTEM MASTER CODE
] key. The area lights of the areas assigned to
ACC
action light will continue to flash.
RG
] or [
ACCESS CODE
action light will
CCESS
] with Master
RG
Advertisement
Table of Contents
