Area Assignment - Digiplex DGP2-648BL User Manual

Press option ON/OFF
[6]
OFF (default)
ON
[7]
OFF (default)
ON
[8]
OFF (default)
ON

7.3 Area Assignment

In a partitioned system the system can be divided into distinct
protected areas. Programming access to a specific area or areas is
called Area Assignment. User Access Codes are only able to
perform actions (arming, disarming, etc.) in the area(s) the code is
Option Description
Stay and Instant Arm
Stay and Instant Arm feature disabled.
Stay and Instant Arm feature enabled.
Can Stay or Instant Arm the system.
Force Arm Feature
Force Arm feature disabled.
Force Arm feature enabled.
User Access Code obeys the keypad's area
assignment in a partitioned system. When
you enter your user code, your keypad will
permit access only to areas it controls. This
feature applies to both options.
When option [8] is ON, the keypad will
permit access to all the areas assigned to
the User Access Code. When option [8] is
OFF, the keypad will only permit access to
the areas it controls. This option is active
but not functional on the DGP2-648BL
keypad.
Area Access
Digiplex LED Keypad 21n