Table of Contents
Advertisement
5.8 Auto-Arming
You can program one or more areas to arm automatically. Ask your
installer for details.
5.8.1 Timed Auto-Arming
You can set the time that an area will arm itself automatically.
How do I set the Auto-Arming timer?
1) Enter your [
Beep and the A
2) Press the [0] key. Your keypad will emit a Confirmation Beep,
and the P
RG
3) Press the [
action light will illuminate (see note on page 15).
4) Enter the time that you want the area to arm. Set the time
according to the 24-hour clock (i.e. 9 a.m. is 09:00 and 9 p.m. is
21:00).
The M
action light will flash if a time is not already programmed.
EM
The P
action light, the area light of the chosen area, and the first
RG
number of the previous time set will illuminate (10 light = zero).
5) Press the [
If you have access to more than one area, the symbol(s)
corresponding to the area(s) for which you have access will
illuminate in sequence. Press the number key representing
the area you want to arm. To view the time set, instead of
entering the time in Step 4, the first number of the time you
set will illuminate. Press the [ ] key to illuminate the
numbers one at a time (numerical light 10 represents zero).
12 User Manual
ACCESS CODE
action light will flash.
CCESS
action light and area light(s) will flash.
] key. The P
MEM
] key to save and exit.
ENTER
]. Your keypad will emit a Confirmation
action light will flash and the M
RG
EM
Advertisement
Table of Contents
