Access Codes; System Master Code (Default 123456); Copy User Options; User Labels - Digiplex EVO641 User Manual

Access Codes allow access to the system. Your system supports up to 999 user access codes. Codes are given a User
Number between 002 and 999 (User Number 001 is the System Master Code). Your installer will program user access codes
to be four, six, or variables of one to six digits in length. Each digit can be any value between zero and nine. If your installer
programmed your system to accept a variable code length, you have to press the [
access code.
LCD LED
LCD
LCD

6.0 Access Codes

6.1 System Master Code (Default 123456)

The System Master Code will give you access to all the features available on your
system, as well as the ability to add, modify, or delete any user access codes. We
suggest that you change this code to prevent others from accessing and changing
options without authorization. Your installer can set the System Master Code to be either
4 or 6 digits in length.
To change the System Master Code:
1. Enter the current [S
2. Press the [0] button.
3. Press the [ ] button.
ACC
4. Enter the numbers [0] [0] and [1].
5. Enter a [
NEW CODE
6. Press the [
ENTER
The System Master Code has access to all Access Control doors and all
Access Control features at all times. Only the card's serial number and the
choice of arming method can be changed. If the other options are manually
changed, the System Master Code will immediately revert to its original
programming.
You can assign a label (name) to a user access code at any point during the
"Programming User Access Code" process. Refer to section 6.3 on page 9 to
assign a User Label.

6.2 Copy User Options

This feature allows you to copy the User Options, Access Control Options, and Area
Assignments from one user access code to another. All User Options are copied except
the User Code, Card Assignment, and User Label.
To copy user options:
1. Enter your [
ACCESS CODE
feature).
2. Press the [0] button, and then the [
3. Enter the 3-digit User number you wish to copy TO.
4. Press the [ ] button.
MEM
5. Enter the 3-digit User number you wish to copy FROM.
6. Enter a user code. If the user code is of variable length, press the [
entering the user code. If necessary, assign an Access card (step 13 in section 6.5.1
on page 12) and User Label (section 6.3 on page 9).
7. Press [ ] to save and exit.
ENTER

6.3 User Labels

User labels personalize user access codes and can be assigned by pressing [
any point after step 4 during the programming of user access codes (refer to section
6.5.1 on page 12). For Example, LCD keypads can display John Smith Select Action.
To program a user label:
1. At any point after step 4 in section 6.5.1 on page 12:
2. Press the [
ENTER
3. Type the desired characters as detailed in section 6.3.1 on page 10 and section 6.3.2
on page 10.
M C ] (default: 123456).
YSTEM ASTER ODE
].
] button to save and exit.
] (System Master Code or user access code with Master
] button.
ACC
] button.
] button after entering your user
ENTER
ENTER
EVO Systems 9
] button after
] at
ENTER