Disarming; Entry Delay Timer; Disarming An Armed System - Digiplex DGP2-648BL User Manual

6.0 Disarming

When the system is disarmed, the system deactivates the zones so
the alarm will not be triggered if zones are breached. Any user can
disarm the system unless their code has been assigned the Arm
Only option.
24hr. zones/Fire Zones are always active (enabled),
therefore will always generate an alarm if triggered.

6.1 Entry Delay Timer

Based on your instructions the installer will program designated entry
points, such as the front door or the garage door, with an entry delay.
This delay will allow you enough time to enter your code to disarm
the system before the alarm is triggered.

6.2 Disarming an Armed System

You will only be able to disarm the area to which your User Access
Code is assigned. User Access Codes with the Arm Only option will
not be able to disarm the system.
How do I disarm the system?
1) Enter your [
2) Press the [
area, select the area(s) you wish to disarm.
Use One-Touch keys (see section 5.6) or a keyswitch (see
section 5.7) to disarm the area.
How do I disarm a system in alarm?
1) Enter your [
2) Call your security company quickly to advise them of the alarm.
ACCESS CODE
] button. If you have access to more than one
DISARM
ACCESS CODE
].
].
Digiplex LED Keypad 15n