Bypass Programming - Digiplex DGP2-648BL User Manual

5.8.2 No Movement Auto-Arming
Your system can send a report to the security company and/or arm
the system if there is no activity in the area during a specified period
of time. Speak to your installer about this feature.

5.9 Bypass Programming

The installer can program certain zones with the bypass option. This
will enable you to program the system to bypass certain zones when
you arm the protected area. When a zone is bypassed, it will be
ignored the next time you arm the system. If for example, you are
renovating part of a protected area you can bypass some of its
zones. The system will keep the bypassed zone(s) in memory until
the area is armed. Once the area is disarmed, the system will
unbypass the zones.
To Bypass a Zone:
• Your installer must program the selected zone(s) to have the
Bypass feature enabled.
• Program your User Access Code to include the Bypass option.
• Ensure that your User Access Code can access the zone's area
assignment.
Fire Zones cannot be bypassed.
Digiplex LED Keypad 13n