Table of Contents
Advertisement
12.0 Testing and Maintenance
12.1 Burglar Alarm Testing
This test requires two people. One person will watch the keypad
while the other person walks around and opens the zones (i.e. open
the doors and windows that are protected). The numerical lights for
the opened zones will illuminate when opened (or breached). If a
zone does not register, contact your installer. Use Area Status
Display to view the open zones in other areas assigned to your
keypad. Your installer will provide details on the best way to test your
particular system.
12.2 Fire Alarm Testing
Do NOT use an open flame or burning materials to test your fire
detection devices. Your installer will provide details on the best way
to test your particular system.
12.3 System Maintenance
Under normal use your system requires virtually no maintenance
other than regular testing. Your installer should change the battery
every three years.
12.4 System Test
Speak to your installer before conducting a system test since the
system must be programmed to respond to the test instructions. We
recommend that you conduct the system test once a week. Contact
your installer for instructions concerning your particular system.
Digiplex LED Keypad
35n
Advertisement
Table of Contents
