Table of Contents
Advertisement
How do I bypass a zone?
1) Enter your [
Beep and the A
2) Press the [
B
action light will flash.
YP
3) Enter the two-digit number(s) of the zone(s) you want to bypass
and the corresponding number(s) will illuminate. If a zone's
number is illuminated and you reenter its number, the zone will
unbypass and the number will extinguish.
If a zone's number does not illuminate and your keypad emits a
Rejection Beep, the zone may not have the Bypass feature accessible.
4) Press the [
remain illuminated to indicate that zones are bypassed.
5.9.1 Bypass Recall
The Bypass Recall feature enables you to bypass the same zones
that were bypassed previously at the touch of a key.
How do I activate Bypass Recall?
1) Enter your [
Beep and the A
2) Press the [
BYP
the P
action light will illuminate. The B
RG
3) Press the [
MEM
last time the system was armed will illuminate and will be bypassed.
4) If you wish, reenter the zone's number to change a bypassed
zone to an unbypassed zone and vice versa.
5) Press the [
14 User Manual
ACCESS CODE
action light will flash.
CCESS
] key. The P
BYP
] key to save and exit. The B
ENTER
ACCESS CODE
action light will flash.
CCESS
] key. Your keypad will emit a Confirmation Beep and
] key. All zones (numerical lights) bypassed during the
] key to exit.
ENTER
]. Your keypad will emit a Confirmation
action light will illuminate and the
RG
]. Your keypad will emit Confirmation
YP
action light will
YP
action light will also flash.
Advertisement
Table of Contents
