Auditory Feedback (Beep Tones); Keypad Indicator Lights - Digiplex DGP2-648BL User Manual

2.1 Auditory Feedback (Beep Tones)

When you enter information on your keypad, it will guide you with
beep tones to communicate acceptance or rejection of your entries.
Confirmation Beep: When an operation (i.e. arming/disarming) is
successfully entered or when the system switches to a new status/
menu, your keypad will emit intermittent beep tones
(" - -
BEEP BEEP BEEP
Half Beep: When a step of an operation is successfully entered on the
keypad, it will emit short intermittent beep tones ("
Rejection Beep: When reverting to a previous status, or when an
operation is incorrectly entered, your keypad will emit a continuous
beep ("
BEEEEEEEEP

2.2 Keypad Indicator Lights

For this keypad, the state of the "Status", "AC", and "Action" lights
(see Figure 1 on page 2) represent a specific condition in your
system.
2.2.1 Normal Mode
If no actions are being performed on your keypad, it will remain in
Normal Mode. In Normal Mode the keypad will illuminate:
• The "AC" light if power is present.
• The numerical lights representing any open or tampered zones.
• The area lights if any areas are armed.
• The M action light if any alarms have occurred.
EM
• The T action light if any troubles are occurring.
RBL
- - ").
BEEP BEEP
").
- -
BEEP BEEP BEEP
Digiplex LED Keypad
").
3n