Digiplex DGP2-648BL User Manual page 32

9.3.2 Setting a Chime Zone Time Period
How do I program all the keypad's Chimed Zones to beep only
when they open between specific hours?
1) Enter your [
Beep. The A
2) Press the [9] key to enter the Chiming Menu. Your keypad will
emit a Confirmation Beep. The P
light(s) will flash.
3) Press the [2] key. Your keypad will emit a Confirmation Beep. The
P action light and a numerical light will illuminate. The
RG
numerical light represents the first number of the previously set
time (numerical light 10 = zero). When the A2 and A3 area lights
flash, this means that no time value has been set and the default
setting (00:00 to 00:00) is unchanged.
4) Enter the time you want all chimed zones to start beeping when
they open according to the 24-hour clock (i.e. 9 a.m. is 09:00 and
9 p.m. is 21:00). Your keypad will emit a half beep.
5) Enter the time you want all chimed zones to stop beeping when
they open according to the 24-hour clock. If you want the chimed
zones to beep every time they open, enter the same time set in
Step 4. Your keypad will emit a Confirmation Beep.
6) Press the [
CLEAR
28 User Manual
]. Your keypad will emit a Confirmation
ACCESS CODE
action light will flash.
CCESS
] key to exit.
action light and area action
RG