Table of Contents
Advertisement
How do I Instant Arm?
1) Enter your [
Beep. The A
2) Press the [5] key.
If you have access to more than one area, press the number key
representing the area you want to Instant Arm or the [0] key for all
assigned areas. After the Confirmation Beep, the Exit Delay Timer
will begin the countdown to arming.
5.5 Force Arming
Force Arming allows you to arm your system when specific zones are
open. Your installer can program certain zones to remain unarmed
when you initiate Force Arming. Once the open zone is closed,
however, the system will then arm it as well. Only User Access
Codes with the Force Arm option enabled can Force Arm the system.
This feature is commonly used when a motion detector is protecting
an area occupied by a keypad. During Force Arming, the motion
detector will remain unarmed (will be ignored) until you exit the area
that it protects. The system will then arm the motion detector.
How do I Force Arm?
1) Enter your [
2) Press the [
If you have access to more than one area, press the area's
number, press the [0] button for all areas. The Force LED
and the selected area LED will illuminate.
You may use the One-Touch keys (see section 5.6) or a
keyswitch (see section 5.7) to arm the area. Ask your
installer for details.
10 User Manual
]. Your keypad will emit a Confirmation
ACCESS CODE
action light will flash.
CCESS
ACCESS CODE
] key.
FORCE
].
Advertisement
Table of Contents
