Motion Detection Alarm - LJD Digital Security Colossus Pro User Manual

Step 7: Save alarm setup: After your setup, press "Confirm" button and return "Image
Setup" interface. In "Image Setup" menu, press "Confirm" button to save current camera
parameters and return main menu.
Step 8: Save all cameras: If you want to setup other cameras, please repeat from step2 to
step 6. In "Image Setup" menu, press "Confirm" key to save all cameras parameters. Press
"Cancel" button or【ESC】key to abort.

5.10 Motion Detection Alarm

If you enable this function, when there is motion detected, DVR will make alarm.
Step 1: Enter into "Image Setup" menu:
Step 2: Select camera: Use【 】 【 】key to select one camera.
Step 3: Select motion detection sensitivity: On the right side of "Motion Det. Level" item,
there is a list box. That is motion detection sensitivity. There are 7 options, from 0 (the lowest) to
5 (the highest) and "Off". You can use 【 ↑】 【↓】 keys to select one. If you select "Off" option, DVR
will not response even if there is motion detection. If you select other options, it will active
"Motion Area Setup" button and "Policy Setup" button. If you select low sensitivity such as 0,
only when there are great motion detection, DVR can response. On the other side, for high
sensitivity such as 5, DVR will response with small motion detection.
LJD Digital Security Ltd
Copyright © 2005. All rights reserved.
User Manual for COLOSSUS Series Embedded Net DVR
Page
of
62 107