Ptz Control - LJD Digital Security Colossus Pro User Manual

Step 4: Modify password successfully
Move the "Active Frame" to "Confirm" button, press【ENTER】key. If the password is
modified successfully, you will get the main menu. Or an error dialog will be pop up. You can
repeat step 3 to modify again.
4.4

PTZ Control

Note: The user must have the "PTZ control" right.
PTZ control interface
In preview mode, press【PTZ】key, in the login dialog, select one user name and input the
correct password, you can enter into PTZ control interface.
In menu mode, press【PTZ】key, you can enter into PTZ control interface directly.
There is "PTZ Control" prompt in the PTZ control interface. The displayed camera name
means which channel's PTZ is under control. For example, "Camera 01" means you are
st
controlling the 1 camera PTZ.
Select channel
In PTZ control mode, you can press numeric keys to select channel. If DVR has less than 10
channels, press one numeric key to select. For example, press【2】key to selct 2
DVR has 10 or more than 10 channels, you must press two numeric keys to select. For
【 0】 【2】
example, press
LJD Digital Security Ltd
Copyright © 2005. All rights reserved.
User Manual for COLOSSUS Series Embedded Net DVR
nd
to select 2 camera PTZ, and press
nd
camera PTZ.
【 1】 【2】
th
to select 12
Page
If
camera PTZ.
of
28 107