Video Loss Alarm - LJD Digital Security Colossus Pro User Manual

Step 9: Save alarm setup: After your setup, press "Confirm" button and return "Image
Setup" interface. In "Image Setup" menu, press "Confirm" button to save current camera
parameters and return main menu.
Step 10: Save all cameras: If you want to setup other cameras, please repeat from step2 to
step 8. In "Image Setup" menu, press "Confirm" key to save all cameras parameters. Press
"Cancel" button or【ESC】key to abort.
Select "Off" option for "View Tampering", you can delete the view tampering area.
Note: Only one view tampering area can be setup for each camera. The view tampering area
can not be copied. If the schedule is modified, you must reboot the device to make the parameters
into effective.
5.9

Video Loss Alarm

When the video cable or camera has something wrong, the video image is lost. If you enable
video loss alarm, in such case, DVR will make alarm.
Step 1: Enter into "Image Setup" menu:
Step 2: Select camera: Use【 】 【 】keys to select one camera.
Step 3: Enter into advanced settings: Move "Active Frame" to "Advanced settings" item
and press【Enter】to enter into advanced settings interface.
LJD Digital Security Ltd
Copyright © 2005. All rights reserved.
User Manual for COLOSSUS Series Embedded Net DVR
Page
of
60 107