Network Settings - GE 40 User Manual

TruVision DVR 40 User Manual
The following procedure shows how to change the recording settings of a selected camera in the
Recording menu. They can be changed in any order.
In the main menu go to the Network menu icon and press Enter or left-click the mouse. The Network
menu appears.
Caution: The TVR 40 will automatically reboot when any network parameter is changed and saved.

Network settings

Use the network menu to set standard network settings.
IP
Subnet mask
Gateway
DNS
If you are using a static IP address, these values listed above will need to be entered manually. If the
network type is DHCP or PPPoE, these values will be automatically assigned.
To define the network settings
1. In the Network menu go to the IP edit box and press Enter or left-click the mouse to enter edit
mode. Using the numeric buttons on the front panel, or the on-screen keyboard, enter the IP
address. Press Enter again or left-click the mouse to exit edit mode.
2. Go to the Subnet edit box and press Enter, or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the subnet mask number.
Press Enter again or left-click the mouse to exit edit mode.
3. Go to the Gateway edit box and press Enter or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the gateway IP number.
Press Enter again or left-click the mouse to exit edit mode.
4. Go to the DNS edit box and press Enter or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the DNS number. Press
Enter again or left-click the mouse to exit edit mode.
5. Go to the Com Port edit box and press Enter or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the address. Enter again or
left-click the mouse to exit edit mode. The number must be greater than 2000.
6. Go to the HTTP Port edit box and press Enter or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the IE browser port value.
Enter again or left-click the mouse to exit edit mode. The default value is 80.
This field shows the device's current IP address.
This field shows the subnet mask for your network so the DVR will be
recognized within the network.
This field shows the gateway for your network so the DVR will be
recognized within the network.
This field shows the DNS server for your network.
67