Setting Up The Camera Title; Positioning The Camera Title - GE 40 User Manual

TruVision DVR 40 User Manual
The following procedures show how to change camera settings from the Camera menu. They can be
changed in any order.
All changes made to the Camera menu apply to the selected camera. The camera settings of one
camera can easily be copied to another camera.

Setting up the camera title

Each camera can be given a title, which must be unique. If you do not give a camera a title, it is
automatically pre-numbered.
To setup the camera title
1. In the Camera menu go to the Camera list box and press Enter or left-click the mouse. Select the
number of the camera you want to name.
2. Go to the Title edit box and press Enter or left-click the mouse to enter into edit mode.
3. Enter the camera title. Left-click the mouse to enter edit mode. An alphanumeric on-screen
display appears. Select the characters required. Default is a number. Click Shift to select the type
of required character (upper or lower case letters, or special characters.) The character type is
shown on the bottom of the screen.
Note: This edit function can only be done using the mouse.
4. Left-click the mouse to exit edit mode.
5. When you have made all the changes required in the Camera menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.

Positioning the camera title

You can position the camera title anywhere on the screen.
To position the camera title on screen
1. In the Camera menu enable the Title Position check box () if you want the camera title to appear
on-screen. When enabled, the Position setup button alongside it becomes active.
2. Go to the Position setup button and press Enter, or left-click the mouse, to enter into edit mode. A
grid appears on-screen with the camera title in the bottom right corner of the screen.
3. Move the joystick up/down/left/right to move the camera title around the screen. When you are
satisfied with the position, press Enter again or left-click the mouse to confirm and return to the
Camera menu.
Instructions on how to position the camera title are also provided on-screen.
4. When you have made all the changes required in the Camera menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu. Press the Menu button to
return to live mode.
45