GE 40 User Manual page 91

TruVision DVR 40 User Manual
To tour the preset positions
You can tour all preset positions in a camera. First you need to save the steps of preset positions to
include in a tour.
1. In the PTZ menu go to the Preset Tour setup box and press the joystick for Enter, or left-click the
mouse. The Sequence submenu appears.
2. Select the Tour No. edit box, and enter the sequence number you want to add or delete (between
1 and 16) . Press the joystick for Enter, or left-click the mouse.
Each preset tour consists of steps. A step consists of a preset number, a dwell time, and an
auto pan speed.
Note: The PTZ camera used must be able to support a preset function.
3. To add a step, go to Step. For each of the step settings (step number, preset number, dwell time
number, and auto pan number) add the number and press Enter or left-click the mouse. When
completed, select Add.
4. Select Confirm to save the step settings into the selected preset.
5. Check the sequence by selecting the Start button. The preset will then run. To stop the preset
running, select Stop.
6. To delete a step, go to Delete Preset, Enter the step number you want to delete and select the
Delete button.
7. When completed, select the Done button to return to the PTZ menu.
85