Notification Settings - GE 40 User Manual

80

Notification settings

For each alarm notification type, there are several ways to specify how to handle an alarm event.
To setup the notification settings
1. In the Alarms menu go to the Notification setup button and press the joystick for Enter, or left-click
the mouse. The Notification submenu appears.
2. Go to the Notify on list box and select one of the options listed. See Table 12.
Table 12: List of notification options
Condition
HDD Full
PAL/NTSC Mismatch
Illegal Access
IP Address Conflict
Network Failure
Video Exception
3. For each option on how to respond to triggers and alarm outputs press Enter or left-click the
mouse to enable () or to disable.
4. When completed, select OK to return to the Alarms menu.
5. When you have made all the changes required in the Alarms menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu.
When alarm occurs
Hard drives are full (only in No overwrite)
The input and output have a different video format
Login failed on the unit Local as Remote
Two devices on the network have the same IP address
Network connection is lost
A distorted video signal is connected to the video input
TruVision DVR 40 User Manual