Setting Up A Mac - GE 40 User Manual

TruVision DVR 40 User Manual
4. Users can be given local and remote rights. See Table 13 on page 88 for the list. Select each item
that you want to assign to the user and press Enter or left-click the mouse to enable () or
disable.
5. Go to OK and press Enter or left-click the mouse to return to the user menu. Go to OK and press
Enter or left-click the mouse to save the changes and return to the main menu.

Setting up a MAC

The MAC address is not the TVR 40 address but that of the PC which will access the TVR 40. If you
setup a MAC address, only the PC with that MAC address can access the TVR 40.
To setup a MAC address
1. At the PC in DOS prompt use the " ipconfig " command to get the PC MAC address (6 bytes).
2. In the User menu select Set Privileges and press Enter or left-click the mouse. The Set Privileges
submenu appears.
91