98
2. Enter the values for each of the RS-232 parameters listed: baud rate, data bits, stop bits, parity,
flow control, and mode.
There are two options for Mode: Console, and Text insert. For the console mode, connect the RS-
232 port to a PC serial port for HyperTerminal control. For the text insert mode, connect serial
devices such as ATM machines or GE ProBridge for point-of-service (POS) systems.
3. Select OK to accept the changes and return to the System menu.
3. When you have made all the changes required in the System menu, go to OK and press Enter or
left-click the mouse to save all changes and return to the main menu.
Upgrading the firmware
When you upgrade the firmware, you keep all your existing settings. Only the new features are added
with their default settings.
To upgrade the firmware
Note: If upgrading using USB mode, disconnect the mouse beforehand. You cannot use the mouse if upgrading
via the USB port.
1. In the System menu select to the Firmware upgrade button and press Enter or left-click the
mouse. The Upgrade submenu appears.
TruVision DVR 40 User Manual