Network Settings; Ethernet Settings - GE 30 User Manual

Chapter 6: Advanced setup
In the Post-Alarm box, enter the post alarm seconds. The post alarm option defines
the number of seconds recorded after a motion or external alarm is triggered and
includes the alarm data.

Network settings

Accessing the TVR 30 remotely through a network requires that you define certain
network settings. Use the Network screen (shown in Figure 30 below) to define the
network settings of the TVR 30, including:

• Ethernet settings

• IP settings
• E-mail notification settings
• Syncing the TVR 30 time with the network
• DDNS settings (Dynamic Domain Name Service)
• UPnP settings (Universal Plug and Play)
Figure 30: Network screen
Ethernet settings
Use the Ethernet Setting screen (shown in Figure 31 on page 61) to configure
standard Ethernet settings. Click Ethernet Setting Setup in the Network screen to
access the Ethernet Setting screen.
60 TruVision DVR 30 User Manual