Matrox Powerdesk Software; Monitor Setup - Matrox Productiva G100 User Manual

Multi-monitor series graphics card
Hide thumbs Also See for Productiva G100:
Table of Contents

Advertisement

Matrox PowerDesk software

(for Windows NT 4.0)
Note: The Matrox display driver for Windows 98 supports multiple displays. However,
Matrox PowerDesk features are disabled in multi-display mode. To change your display
settings while in multi-display mode, use Windows controls. For more information on multi-
display mode, see Windows 98 online help under "Multiple Display support". Windows 95
doesn't support multiple displays.
To access PowerDesk programs and online documentation, click
. You can also access PowerDesk features by clicking the Matrox QuickDesk icon
PowerDesk NT
(
) on the Windows taskbar.

Monitor setup

To check your monitor settings
1
Click
Programs
In the
2
Current display
you select a number, it appears briefly on the corresponding display.
If you have a Plug-and-Play monitor:
3
Make sure the
Plug-and-Play (DDC) monitor
so, the Matrox display driver automatically uses the correct settings for your monitor. If not,
click this button, then click
If you don't have a Plug-and-Play monitor:
See if the
Default monitor (60 Hz)
Matrox monitor selection method. For more information on Matrox monitor selection, see the
online Matrox PowerDesk guide.
Repeat steps
2
and
4
Note: In multi-display mode, each monitor has its own monitor settings.
Note: Many Plug-and-Play monitors don't automatically report if they're capable of
1152 × 864 or 1600 × 1200 and higher display resolutions. To use these resolutions, or higher
refresh rates than those reported by the monitor, you can use the Matrox monitor selection
method.
WARNING: If incorrect software monitor settings are applied, some monitors can be
permanently damaged. For more information, see your monitor manual.
16
Matrox Productiva G100 Multi-Monitor Series – User Guide
Matrox PowerDesk NT
box, select the display you want to change monitor settings for. When
.
Apply
button is selected. If so, use the
3
for each number in the
Matrox Display Properties
button is selected. If
box.
Current display
Programs
Matrox
.
Monitor

Advertisement

Table of Contents
loading

Table of Contents