Hardware Supplied; Software Supplied; Installation Overview - Matrox ATC Series User Manual

Overview
Thank you for purchasing a Matrox ATC (Air Traffic Control) graphics card. Your Matrox product is
a high-performance graphics card that plugs into an expansion slot inside your personal computer.
This card supports DualHead features, digital and analog monitors, and display resolutions up to
2048 × 2048 (analog or digital) or 2560 × 1600 (dual-link) for your main monitor and up to
1920 × 1200 for a secondary analog monitor.

Hardware supplied

Matrox card
(PCI shown)
* Provided with certain Matrox product.

Software supplied

! Matrox PowerDesk-SE – to use your Matrox graphics hardware
! Other software – see the CD-ROM Readme file

Installation overview

Note:
or all the installation information in this guide may not apply to you. However, this
information may be useful if you need to reinstall your Matrox product.
To install your Matrox product:
Install the Matrox card –
1
Connect your monitors –
2
Install the software –
3
2 Matrox ATC – User Guide
1 BNC cable
(
(for Windows 2000/XP)
If your Matrox product is already partially or fully installed on your computer, some
see "Hardware installation", page
see "Connection setup", page
see "Software setup", page
*
)
DVI to 5× BNC
9.
*
DVI-to-HD15 adapter
3.
6.