Pnp/Pci Configurations - FIC KT-748 Manual

KT-748 Mainboard Manual

PnP/PCI Configurations

Reset Configuration Data
Enabling it to reset the system Extended System Configuration Data (ESCD)
when you exit Setup if you have installed a new add-on card and the
system reconfiguration has caused such a serious conflict that the operat-
ing system can not boot. The options are: Disabled, Enabled.
Resources Controlled By
If set at Auto(ESCD), the BIOS arranges all system resources. If there
exists conflict, select Manual. The options are: Auto (ESCD), Manual.
If the manual option is selected, after the featrue IRQ Resources being
pressed, of IRQ- Assigned To are: PCI Device, Reserved. When resources
were controlled manually, assign each system interrupt a type, depending
on each device type to use the interrupt.
PCI/VGA Palette Snoop
Set this feature to be enabled if any ISA adapter card installed in the system
requires the VGA palette snoop function.
The options are: Disabled, Enabled.
3 - 16