FIC KT-748 Manual page 38

KT-748 Mainboard Manual
IDE Secondary Master/Slave PIO
Allows an automatic or a manual configuration of the PCI secondary IDE
hard drive (master/slave) mode.
The options are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master/Slave UDMA
Allows you to select the first PCI IDE channel of the first master/slave hard
disk mode or to detect it by the BIOS if the hard disk supports UDMA
(Ultra DMA, faster than DMA). The options are: Auto, Disabled.
Secondary Master/Slave UDMA
Allows you to select the second PCI IDE channel of the secondary master/
slave hard disk mode or to detect it by the BIOS if the hard disk supports
UDMA (Ultra DMA, faster than DMA). The options are: Auto, Disabled.
IDE Burst Mode
Allows you to disable the IDE channel burst mode.
The options are: Enabled, Disabled.
SIS OnChip PCI Device
SIS USB Controller
Disable this option if you are not using the onboard USB feature.
The options are: Disabled, Enabled.
USB 2.0 Support
Disable this option if you are not using the onboard USB 2.0 feature (USB
1.1 not effected). The options are: Disabled, Enabled.
USB Keyboard Support
When a USB keyboard is installed, please set at Enabled.
The options are: Disabled, Enabled.
Onboard SuperIO Device
Onboard FDC Controller
When enabled, the floppy diskette drive (FDD) controller is activated.
The options are: Enabled, Disabled.
3 - 10