Pci & Onboard I/O Setup - Abit IT5E Series User Manual

3-24
(6) PCI & Onboard I/O Setup
In this menu, you can change the INT# and IRQ of the PCI bus and
the onboard I/O device, I/O port address and other hardware settings.
Reset Pnp Config Data
PCI PnP BIOS Auto-Config
PCI IRQ Actived By
1st Available IRQ
2nd Available IRQ
3rd Available IRQ
4th Available IRQ
PCI IDE Card 2nd Channel
PCI IDE Card IRQ Map to
Primary IDE INT#
Secondary IDE INT#
Onboard USB Controller
Onboard IDE-1 Controller
-Master Drive PIO Mode
-Slave Drive PIO Mode
Onboard IDE-2 Controller
-Master Drive PIO Mode
-Slave Drive PIO Mode
Reset PnP Config Data:
If you want to clear ESCD data next time you boot up, and ask the
BIOS to reset the settings for the Plug & Play ISA Card and the PCI
Card, select Enabled. But the next time you boot up, this option will
automatically be set as Disabled.
Computer
ESCD (Extended System Configuration Data)
Knowledge
The ESCD contains the IRQ, DMA, I/O Port, Memory
information of the system. This is a specification and a
feature specific to Plug & Play BIOS.
ROM PCI/ISA BIOS (XXXXXXXX)
PCI & ONBOARD I/O SETUP
AWARD SOFTWARE, INC.
: Disabled
: Disabled
: Level
: 10
: 11
: 9
: 5
: Enabled
: PCI-AUTO
: A
: B
: Disabled
: Enabled
: Auto
: Auto
: Enabled
: Auto
: Auto
Fig 3-6 PCI & Onboard I/O Setup
Onboard PS/2 Mouse
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
-Onboard IR Function
-IR Duplex Mode
Onboard Parallel Port
-Parallel Port Mode
-ECP Mode Use DMA
Esc : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Chapter 3
: Enabled
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: IrDA
: Half
: 378/IRQ7
: ECP+EPP1.9
: 3
¡ ô ¡ õ ¡ ÷ ¡ ö : Select
Item
PU/PD/+/- : Modify
(Shift)F2 : Color