Pci & Onboard I/O Setup - Abit SM5 User Manual

3-26
± PCI & Onboard I/O Setup
In this menu, you can change the INT# and IRQ of the PCI bus and the
onboard I/O device, I/O port address and other hardware settings.
Reset Pnp Config Data
PCI PnP BIOS Auto-Config
PCI IRQ Actived By
1st Available IRQ
2nd Available IRQ
3rd Available IRQ
4th Available IRQ
PCI IDE Card 2nd Channel
PCI IDE Card IRQ Map to
Primary IDE INT#
Secondary IDE INT#
Onboard USB Controller
Onboard IDE-1 Controller
-Master Drive PIO Mode
-Slave Drive PIO Mode
Onboard IDE-2 Controller
-Master Drive PIO Mode
-Slave Drive PIO Mode
Reset PnP Config Data:
If you want to clear ESCD data next time you boot up, and ask the BIOS to
reset the settings for the Plug & Play ISA Card and the PCI Card, select Enabled.
But the next time you boot up, this option will automatically be set as Disabled.
Computer
Knowledge
ESCD (Extended System Configuration Data)
The ESCD contains the IRQ, DMA, I/O Port, Memory data of all
PnP cards, PCI cards and Onboard I/O. This is a specification and
a feature specific to Plug & Play BIOS.
ROM PCI/ISA BIOS (XXXXXXXX)
PCI & ONBOARD I/O SETUP
AWARD SOFTWARE, INC.
: Disabled Onboard PS/2 Mouse
: Disabled Onboard FDD Controller
: Level Onboard Serial Port 1
: 10 Onboard Serial Port 2
: 11
: 9
: 5 Onboard Parallel Port
: Enabled
: PCI-AUTO
: A
: B
: Disabled
: Enabled
: Auto Esc : Quit
: Auto F1 : Help
: Enabled F5 : Old Values
: Auto F6 : Load BIOS Defaults
: Auto F7 : Load Setup
Defaults
Fig 3-6 PCI & Onboard I/O Setup
-Onboard IR Function
-IR Duplex Mode
-Parallel Port Mode
-ECP Mode Use DMA
Item
Chapter 3
: Enabled
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: IrDA
: Half
: 378/IRQ7
: ECP+EPP1.9
: 3
¡ô¡õ¡÷¡ö : Select
PU/PD/+/- : Modify
(Shift)F2 : Color