Power Management Setup Menu - Abit IT5E Series User Manual

3-20

(5) Power Management Setup Menu

The difference between Green PCs and traditional computers is that Green
PCs have a power management feature. With this feature, when the computer is
powered on but inactive, the power consumption is reduced in order to save
energy. When the computer operates normally, it is in Normal mode. In this mode,
the Power Management Program will control the access to video, parallel ports,
serial ports and drives, and the operating status of the keyboard, mouse and other
device. These are referred to as Power Management Events. In cases where none
of these events occur, the system enters the power saving mode. When one of the
controlled events occurs, the system immediately returns to normal mode and
operates at its maximum speed. Power saving modes can be divided into three
modes according to their power consumption: Doze Mode, Standby Mode , and
Suspend Mode. The four modes proceed in the following sequence:
Normal Mode===> Doze Mode===> Standby Mode===> Suspend Mode
The system consumption is reduced according the following sequence:
Normal >
1. In the Main Menu, select "Power Management Setup" and press "Enter". The
following screen is displayed:
Power Management
PM Control by APM
Video Off Method
Video Off Option
Modem Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
** Wake Up Events In Doze & St andby **
IRQ 3 (Wake-Up Event)
IRQ 4 (Wake-Up Event)
IRQ 8 (Wake-Up Event)
IRQ 12 (Wake-Up Event)
2. Use arrow keys to go to the item you want to configure. To change the
Doze > Standby
ROM PCI/ISA BIOS (XXXXXXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Use Define
: Yes
: V/H SYNC+Blank
: Susp, stby --> off
: NA
: Disable
: Disable
: Disable
: Disable
: ON
: ON
: OFF
: ON
Fig 3-5 Power Management Setup Menu
> Suspend
** Power Down & Resume Event **
IRQ 3 (COM2)
IRQ 4 (COM1)
IRQ 5 (LPT2)
IRQ 6 (Floppy Disk)
IRQ 7 (LPT1)
IRQ 8 (RTC Alarm)
IRQ 9 (IRQ2 Redir)
IRQ 10 (Reserved)
IRQ 11 (Reserved)
IRQ 12 (PS/2 Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (IDE-1)
IRQ 15 (IDE-2)
Esc : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Chapter 3
: ON
: ON
: ON
: ON
: ON
: OFF
: OFF
: OFF
: OFF
: ON
: ON
: ON
: ON
¡ ô ¡ õ ¡ ÷ ¡ ö : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color