HYOSUNG Sense SD-50 Service Manual page 54

● Install the spring ⑫.
● Install the clutch shoe assembly ⑬ and nut ⑭.
● Tighten the nut to the specified torque with the special tool.
09930-40113
Tightening torque
● Insert the V-belt between the driven faces as deep inside as
possible while pulling the movable driven face all the way out-
side to provide the maximum belt clearance.
CAUTION:
The belt should be positioned so that the arrows on
the belt periphery point the normal turning direction.
The V-belt contact face on the driven faces should be
thoroughly cleaned to be free from oil.
● Thoroughly clean the clutch housing ⑬ to be free from oil and
position it over the clutch shoe assembly.
● Tighten the clutch housing nut ⑭ to the specified torque with
the special tool.
09930-40113
Tightening torque
Rotor holder
40-60 N∙m
(4.0-6.0 kg-m, 29.0-43.5 lb-ft)
Rotor holder
40-60 N∙m
(4.0-6.0 kg-m, 29.0-43.5 lb-ft)
⑭
⑬
⑫
⑭
ENGINE 3-32
Special tool
⑬
Special tool