HYOSUNG Sense SD-50 Service Manual page 32

● Remove the bearing ⑦ with the special tool.
09913-75820
● Remove the oil seal ⑧ with the special tool.
09913-50121
CENTER STAND
● Remove the return spring ①.
● Remove the cotter pin ②, washer ③ and shaft ④.
● Remove the center stand ⑤.
CRANKCASE
● Remove the crankcase securing screws.
NOTE:
Loosen the crankcase nuts diagonally.
09920-13120
Bearing remover
(Bearing installer)
Oil seal remover
Crankcase separation tool
Special tool
Special tool
⑤
③ ②
ENGINE 3-10
⑦
⑧
①
④