HYOSUNG Sense SD-50 Service Manual page 100

6-15 CHASSIS
CALIPER INSPECTION
Inspect the caliper cylinder bore wall for nicks, scratches or other
damage.
Inspect piston for damage and wear.
Inspect each rubber part for damage and wear.
CALIPER REASSEMBLY
Reassemble and remount the caliper in the reverse order of removal
and disassembly, and also carry out the following steps.
CAUTION:
Wash the caliper components with fresh brake fluid
before reassembly. Never use cleaning solvent or
gasoline to wash them. Apply brake fluid to the
caliper bore and piston to be inserted into the bore.
● Apply silicone grease to the caliper holder.
99000-25100
● Tighten the each bolts.
Item Nㆍm
③ 18-28
④ 20-25
WARNING:
Bleed the air from brake fluid circuit after reassem-
bling caliper(See page 2-8)
Silicone grease
kgㆍm lb-ft
1.8-2.8 13-20
2.0-2.5 14-18
Apply grease
③
④