HYOSUNG Sense SD-50 Service Manual page 109

STEERING OUTER RACE NUT
● Tighten the steering outer race ① until resistance is felt, then
loosen it 1/8-1/4 turn.
NOTE:
This adjustment will vary from motorcycle to motorcy-
cle. Make sure that the steering turns smoothly and
easily, left to right.
● Tighten the steering stem lock nut ② with the special tool.
Tightening torque
09910-60611
● Install the handlebar and tighten the set bolt ③ and clamp nut
④ to the specified torque.
③ Tightening torque
④ Tightening torque
C A U T I O N :
A f t e r p e r f o r m i n g t h e a d j u s t m e n t a n d i n s t a l l i n g t h e
h a n d l e b a r , " r o c k " t h e f r o n t w h e e l a s s e m b l y f o r -
w a r d a n d b a c k w a r d t o e n s u r e t h a t t h e r e i s n o
p l a y a n d t h a t t h e p r o c e d u r e w a s a c c o m p l i s h e d
c o r r e c t l y . I f p l a y i s n o t i c e a b l e , r e a d j u s t t h e
s t e e r i n g o u t e r r a c e n u t .
60-100 Nㆍm
(6.0-10.0 k gㆍm, 43.5-72.5 lb-ft)
Universal clamp wrench
22-28 Nㆍm
(2.2-2.8 kgㆍm, 15.9-20.3 lb-ft)
48-52 Nㆍm
(4.8-5.2 kgㆍm, 34.5-37.5 lb-ft)
CHASSIS 6-24
①
②
③
④