HYOSUNG Sense SD-50 Service Manual page 105

● Loosen the front fork bolt, then draw out the fork spring.
● Loosen the front fork lower clamp bolts.
● Invert the fork and stroke it several times to remove the oil.
● Hold the fork inverted for a few minutes.
● Remove the scoket bolt ① with the hexagon wrench.
● Seperate the fork pipe ② and pipe seat ③.
● Remove the dust boot ④ and stopper ring ⑤.
● Remove the oil seal by using the special tool.
CAUTION:
The oil seal removed should be replaced with a new
oil seal.
CHASSIS 6-20
②
①
③
④
⑤