HYOSUNG Sense SD-50 Service Manual page 30

● Remove the circlip �.
● Remove the bearing � with the special tool.
09941-50111
CAUTION:
The removed bearing should be replaced with a new
one.
TRANSMISSION
● Drain gear oil.
● Remove the gear box cover ①.
● Remove the driveshaft ②.
● Remove the oil seal ③ from the gear box cover with the special
tool.
09913-50121
CAUTION:
The removed oil seal should be replaced with a new
one.
● Remove the bearing ④ with the special tool.
09943-88211
CAUTION:
The removed bearing should be replaced with a new
one.
�
�
�
Wheel bearing remover
Oil seal remover
Bearing remover
(Bearing installer)
�
Special tool
①
②
Special tool
③
Installer
ENGINE 3-8
④